interferance problem. help please

[sparkrite]

I've got a sony 725 dvd into scart 1 on my sony 32fx65,a panasonic video into scart 2 and a pace digibox into scart 3,with a scart link between the video and the digibox.The problem is if i tape anything off terrestrial tv i get interferance when watching it back,but if i turn my digibox off the problem goes.I think i read somewhere that it might be solved by cutting a link in a scart lead but i'm unsure of this.Any help would be much appreciated

[Fozzybear]

how close physically is the digibox to the VCR? Might be worth moving it away in case it's air-borne interference.

[andymc]

I have the KV32FX60U which is the predecessor of your set.
There is an option in the set up menus to set the channel that is output through the SCART. AV2 (at least) can send as well as receive so you can use the TV to route to the VCR.
I've never had any problems but you may wish to try disabling the output or setting it to a different AV source to minimise your intereference problem.

AMc

[sparkrite]

many thanks guys ,i'll give these a try

[Greenstead]

I have a similar setup to you sparkrite.
You have AV2 on the Pace feeding AV2 on the VCR? And UHF OUT on the Pace feeding RF IN on the VCR for terrestial analogue? (I do).

I could use the same connections you use but I wanted to take RGB from the VCR. So I take AV1 on the VCR into the 725 AV2. When the DVD is powered off it allows the VCR to feed RGB thro the DVD into the TV AV1. So I don't have any connection to the TV AV2 as it happens.

I don't get any interference problems with terrestial recordings, or anything else.
:)

Hope that makes sense.
:(